The combustion of biomass materials as fuel is generally mainly agricultural and forestry waste (such as straw, sawdust, bagasse, rice bran, wood chips, etc.), which is mainly distinguished from fossil fuels. In the current national environmental protection policy standards, direct combustion is a highly polluting fuel and is not allowed to be used directly. The application of biomass drying fuel plant is mainly based on biomass compression molding fuel. It is a raw material that is used as raw materials, crushed, mixed, extruded, dried etc, and is made into various shapes. A new type of clean fuel that can be directly burned.

  Zhengzhou Dingli responded to the call of the country and conformed to market development. Investing a large amount of human and financial resources and actively researching and developing practices, Dingli Biomass Fuel Drying Production Line adopts a unique drying process, which has the advantages of compact structure, strong applicability, high efficiency, low consumption, energy saving and environmental protection. The specific process flow is as follows: the material first enters the inner layer of the rotary drum by the feeding device, realizes the downstream drying, and the spiral travels to realize the heat exchange; in the middle layer, it is continuously advanced repeatedly, and takes two steps and takes a step back. The way of travel; then in the middle layer can fully absorb the heat emitted by the inner roller and absorb the heat of the middle roller. Finally, the material goes to the other end of the middle layer and falls into the outer layer, and travels in a rectangular multi-loop manner in the outer layer drum, and the material that achieves the drying effect rapidly travels out of the drum under the action of hot air, and is sufficiently dried in the rectangular copy board. Complete the entire drying process.

  Welcome to Dingli inquiry and order biomass fuel dryers.