When using cassava slag drying equipment, the choice of equipment is very important, but safety and so on are even more important. Therefore, the inspection work before the use of cassava slag dryer must be done in place, so that not only is it guaranteed. The safety of the entire production, while also avoiding the following details, resulting in low efficiency of the entire drying process, the following will introduce some details of the inspection work.

  First of all, check the various components, check all the auxiliary equipment, including the various transmission parts of the dryer, the supporting parts, etc., should be tightened, normal, etc. In addition, in contact with the wheel, the retaining wheel and the supporting wheel should be slightly contact. Check the sealing condition (the discharger's hole door is closed, the seal is good, the feed seal wears, the discharge lock valve moves and the air locks well). In this production line, it should be checked whether the feeding device, the combustion chamber, the slag in the furnace pit, the furnace door, the air duct, the regulating valve and the blower, the dust collector and other accessories are in good condition, and whether the connection with the upper and lower processes is normal, etc., and the fuel inspection Prepare the raw materials and check the hot air stove **. To ensure that the entire production line is operational.

  Welcome to Dingli inquiry and order cassava dregs dryer.