Dingli dryers daily maintenance.

Machine maintenance

1. The axle bears the full load of the machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required lubricant must be cleaned and the seal must be good. This machine The main oil filling station (1) rotating bearing (2) roll bearing (3) all gears (4) movable bearing, sliding plane.

2. The newly installed tires are prone to loosening and must be inspected frequently.

3. Pay attention to whether the work of all parts of the machine is normal.

4. pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.

5. The plane of the undercarriage of the movable device should be out of dust and other materials to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.

6. the bearing oil temperature rises, should be stopped immediately to check the reasons to eliminate.

7. If there is impact sound when the rotating gear is running, it should be stopped immediately to check and eliminate

Installation test

1. The equipment should be installed on a level concrete foundation and fixed with anchor bolts.

2. When installing, pay attention to the vertical direction of the main body and the horizontal.

3. After installation, check whether the bolts in all parts are loose and the main door is tight. If so, tighten it.

4. Configure the power cord and control switch according to the power of the device.

5. After the inspection is completed, the empty load test is carried out, and the test can be carried out normally.