The screw press in the press type is recognized as one of the better-performing machines. It can save a lot of electric energy by using the rotation of the spiral tube, and the pressing effect is also excellent, which is a machine that can do more with less.The screw extruder consists of a number of structures, each of which is irreplaceable. Only if the function of each component is intact, there will be fewer and fewer problems in the pressing process, and even basically no problem can be achieved. The problem is to save time and squeeze more raw materials.

  The first part is the feed hopper. This place should pay attention to ensure that the material enters the machine smoothly and does not involve humans. It needs to be designed as a rotatable device that increases the kinetic energy of the feed hopper and brings the material into the machine by turning it instead of using manual feeding. Manual feeding is very laborious, and the speed can't keep up, and it is not safe.

  The second part is the pressing screw, which is the device that plays an important role in the pressing of the raw material. The material of the spiral tube should be made of stainless steel to ensure high-quality pressing for a long time without being eroded. Because different industries need different materials to be pressed, it is recommended that you have a material to observe the spiral. In addition, the shape of the spiral tube should also be observed. Whether the structure of the spiral is reasonable or not, there is no vacant part in the middle.

  The third part of the drive unit, the good screw press uses a direct drive to ensure a smoother process in the press, a reliable way to save energy. The fourth part is that there will be a spring baffle at the time of pressing, the main function is to increase the elasticity during the pressing process and ensure that the raw materials are fully pressed.