Poultry manure drying machine perfect design process is not all the equipment operation, the actual operation process to show our design technology. In the actual operation of the dryer, we often encounter some unexpected failures occur, these failures are caused by many factors, and sometimes due to fault anomalies, it is difficult in the shortest possible time to find the answer to the question, Timely do a good job of the dryer is our record of further drying machine failure process. Experienced dryer users believe that when the dryer failure, there is no breakdown of the size of the points, as long as the impact on our production, it is necessary to timely maintenance work. Because for the dryer for any small problem is likely to develop into a big fault. In the case of

Poultry manure drying machine on the material sticky wall has always been a major problem facing the food dryer, modern technology has been a sticky wall phenomenon has been a certain degree of relief, but did not fundamentally solve the problem. On the sticky wall phenomenon Here we have a specific analysis of the reasons for its occurrence. Overall, in general, the occurrence of sticky wall is mainly caused by the inconvenience of the operating parameters of the dryer, mainly from the following aspects to analyze:

Poultry manure dryer is the first change in the amount of air flow, the main reason for the change is the system resistance changes. After prolonged use of the dryer, the components of its parts will be subject to certain wear and tear, and some will be subject to some changes in pollution, impurities, such as plugging. The occurrence of these conditions will cause changes in system resistance, resulting in reduced air volume increases the chance of sticky wall. The other is the fan adjustment, fan adjustment will lead to changes in airflow, the general flow of the material for the material sticky wall of a greater impact. So the control of the fan air flow changes in the adjustment of the phenomenon of the sticky wall dryer has a very good effect. Finally, we have to say is the effect of the drying machine caused by the sticky wall, when the atomization effect is small, it will produce a larger droplet, fog dripping rate is low, easy sticky wall.