The potato dregs dryer needs to be prepared before it can be used. This work not only allows the equipment to operate normally, but also allows the material to be dried stably. What preparations do you need to make before starting the specific potato dregs dryer? The preparations for the equipment before the use of the potato dregs dryer are explained below.

  The potato dregs dryer is checked for obstructions around the production area of ​​the dryer and the equipment before use, and there are no debris in the surrounding part. Check if the gear unit of the reducer and dryer is sufficient (the oil mark is displayed). For the oil quality, the grease cup of each bearing should be lubricated. Check the contact between the roller of the dryer and the belt (70% contact), the wheel and the wheel should be slightly in contact. Check the sealing condition (the discharger's hole door is closed, the seal is good, the feed seal is worn, the discharge lock valve is flexible, and the lock is good). Whether the connecting bolts and anchor bolts are loose.

  The above is the prelude to pay attention to before the operation of the potato dregs dryer. Everyone should pay attention to the operation, more knowledge of the potato dregs dryer can be found on Dingli official website.