With the increase of beer production every year, the brewery also produces a large amount of beer waste yeast. The comprehensive utilization of waste yeast is a topic that everyone has been paying attention to. The most important thing for everyone to share is the application of dry feed for comprehensive utilization of waste yeast in brewery.

  Waste yeast is rarely rich in protein, fat crude fiber, carbohydrates, minerals and other nutrients. It can be used as feed ingredients for drying, to make up for the shortage of existing feed ingredients, and also to create profits for enterprises. Currently, yeast can be used in the market. The dryer is processed, taking Dingli yeast dryer as an example: the yeast dryer is a dryer that heats the material and vaporizes by indirect conduction heating, and uses steam to heat. The drying cylinder (roller) is a metal hollow cylinder whose outer surface is processed and has a very high surface finish. Under the driving of the transmission device (large and small gear transmission), the drying cylinder rotates in the axial direction and the rotation speed can be adjusted. The slurry is preheated in the preheating tank, preheated to about 50 °C, and is fed into the lower dip tank of the drying cylinder by a feed pump. The drying cylinder is immersed in about 60-80 mm, and the outer surface of the rotating drying cylinder is coated with a The layer of uniform slurry (ie, film thickness), the steam pressure in the drying cylinder is 0.15-0.3Mpa, the slurry is heated on the outer wall of the drying cylinder, and the water is vaporized and discharged by the axial flow fan. The drying cylinder rotates for one week, and the material is finished to be dried. The sheet material is discharged from the outer wall of the drying cylinder by the scraper, and is collected at the discharge port to complete the drying work. Welcome to Dingli inquiry and order equipment.