Dingli is a comprehensive scientific and technological innovation enterprise integrating scientific research, development, production, sales and service of corn slurry drying equipment. Dingli's corn slurry dryer equipment is suitable for the drying of corn slurry materials. Today, Dingli will briefly introduce the workflow of corn slurry dryer.

  Most of the corn slurry is corn husk, which is commonly known as corn gluten. It is a by-product of the production of starch and germ after humidifying corn. The main ingredient is corn husk. The sprayed corn husk is sprayed with corn and yellow pulp with high protein and energy content, which greatly increases the energy, protein and amino acid content. After drying, it is a corn spray protein. Because of the good marketability of this kind of feed, many animals like to eat, which is one of the reasons why many enterprises choose it as a drying material. The corn syrup and corn husk are evenly mixed in the mixer, and the water content is 35~40% after mixing. The wet corn husk is conveyed by the feeding machine to the feeding machine, and the corn husk is conveyed to the drying drum by the feeding machine, and the corn husk is evenly dispersed and fully contacted with the hot air under the flapping device uniformly distributed in the drying drum to reach The purpose of drying heat transfer and mass transfer. The dried corn slag is discharged from the finished product through a star discharger at the end of the drum, and the dry material is output by the discharge machine to complete the drying process. Welcome to Dingli inquiry and order equipment.