Soybean processing plants produce a large amount of bean dregs in the process of processing soy products. Fresh bean dregs have high water content, short storage time and high transportation cost. This requires dehydration of soybean dregs to make them better stored or carried out. Deep Processing.

  Bean dregs dewatering machines are more common with belt extruders. The wet bean dregs will pass through the gravity dewatering zone, the pinch zone, and the S-type extrusion zone. The heavy and repeated extrusion will have a good dewatering effect. It can remove about 20 waters, and the dry bean dregs contain about 55%-60% of water. High, tightly gripped water, can be packaged directly for shipment, or high temperature drying will greatly improve and optimize fuel cost and drying efficiency.

  Bean dregs dehydrator technical characteristics

  1. The processing capacity is large, the effect is good, and the output of the filter cake is high

  The advanced and reasonable structure of the mainframe, combined with the special mature supporting technology, the processing capacity is 2-5 times larger than the ordinary dewatering equipment.

  2. The filter cake has a low moisture content

  Our company's original roll extrusion and slag and water reverse operation discharge technology greatly accelerates the separation speed of slag water and reduces the moisture content of the filter cake and the minimum degree of mechanical dewatering.

  3. Good corrosion resistance, acid and alkali resistance