In order to ensure the safe and normal use of the screw dehydrator, it is important to choose good quality equipment, but it can not be ignored during the installation process. Now let's take a look at the equipment flow and standards of the screw dehydrator.

    Before installation, make sure that the equipment delivered by the manufacturer is in accordance with the order. After confirmation, you need to check the standards of bolts and other accessories supplied by the manufacturer to see if the standards match the standards of the base.

    After confirming these problems, you can install the device. If the standard parts are found to be mismatched during the installation of the screw dehydrator, you should contact the manufacturer immediately and remember not to force the installation, which may cause damage.

    After the installation of the base equipment of the screw dehydrator, it is the installation of the bracket, and the stability of the equipment must be guaranteed.

    The internal components and equipment of the screw dehydrator must be careful. In the process of the equipment, it is necessary to manually check the reducer to see the flexibility of the rolling; whether the connection between the components is reliable, and if necessary, smooth the connection parts.

    After the screw dehydrator is intact, you can start the power-on trial operation, of course, this is under no-load conditions. After everything runs normally within the regular time, it can be put into use.