sub.css
Follow us:
Fackbook
Twitter
linkin
Your Location:HOME > Dewatering equipment
 Screw dehydrators
Online Services Send Message

Screw dehydrators

Production capacity:1000~4000kg/h
power:15~45
Screw dehydrators can be widely used for the dehydration process of high-moisture materials,

You can also contact us by:

Global Hotline : +86-371-56739888

Introduction

Screw dehydrators can be widely used for the dehydration process of high-moisture materials, such as vinasse, wood powder, pomace, medical residue, cassava dregs and food waste. This kind of dehydrator could take off 20% to 25% moisture of the wet materials, lower the energy cost and reduce the duty of BSG dryers, which can significantly increase the output. Therefore it is a necessary equipment for the drying process of high-moisture materials. The output can be directly delivered into the drying equipment, greatly lower the energy consumption for the following process.

working principle:

 

At working state, wet materials are conveyed into feeding box at steady rate and then pushed to discharge end by screw rotor blades dewatering. Under the strong extrusion force of screw and dumper regulator, wet materials complete the process of mechanical dehydration. Moisture is taken away when going through the screening mesh and exhausted at the gas discharge outlet. The dry materials is collected at product discharge outlet. For the best balance of drying effect and output, it is applicable for customers to change the operation parameters according to the property of materials and required output.

Advantages:

 

When the motor starts working, wet materials are conveyed into feeding box at steady rate and then pushed to discharge end by screw rotor blades dewatering. Under the strong extrusion force of screw and dumper regulator, wet materials complete the process of mechanical dehydration. Moisture is taken away when going through the screening mesh and exhausted at the gas discharge outlet. The dry materials is collected at product discharge outlet.

1.Our dehydrator products are suitable for high-moisture materials, which can remove 20% to 30% moisture in the material. The moisture content of processed materials is less than 60% (may vary due to different the material).

2.This product adopts mechanical dehydration method, greatly reducing the energy consumption in the process of drying material.

Technical Parameters

Model

DLLT300-1

DLLT300-2

DLLT300-3

Power(kw)

15

30

45

Rate Range(r/min)

125---1250

Weight(t)

1.1

2.3

3.5

Output capacity (t/d)

20~30

45~60

60~75

Footprint(m2)

2.1

4.2

6.6

Recommend Products

Solutions and Cases

Send Message

Thank you for your interest in dingli machine. Any of your comments or suggestions will be welcome to fill in the form of the following email via us.Please, or call + 86-371-67950999. Do not worry, we will not share your name, address or phone number with anyone. We love our company, and will do our best to help you. Thank you for taking the time to get in touch with us.

Name: *
Email: *
Tel: *
Message(*):
 

HOT PRODUCTS

LWT type Screw dehydrator
LWT type Screw dehydrator

Kitchen waste dehydration; Fiber material enrichment and squeeze dehydration; Pulp, waste slag dewat...

Food residue crushing squeezed dehydrator
Food residue crushing squeezed dehydrator

Dingli brand LST series food residue crushing squeezed dehydrator is consisted of the hopper, the f...

COMPANY INFORMATION

No.12 Hongye Road HI-TECH Development Zone, Zhengzhou,China
Email:dingliwyt@gmail.com

TEL:0086-371-56739888