Follow us:
Your Location:Home > Drying equipment
Poultry Manure Rotary Dryer
Online Services Send Message

Poultry Manure Rotary Dryer

Production capacity:35-181t/d

You can also contact us by:

Global Hotline : +86-371-56739888


According to the demand of market, Zhengzhou Dingli New Energy Technology Co.,Ltd designs and manufactures poultry manure rotary dryer, which is also named poultry manure  dryer. It is specifically designed according to the problems of traditional rotary dryer which is not suitable for high-moisture materials that MC is higher than 50% and the viscosity is relatively low. Meanwhile since the ‘black hole’ phenomenon occurring in the drum lowers the drying capacity and raises the energy consumption, the paddle rotary dryer sets high-speed spinning paddles, strengthening the crushing and separating function. The crushing effect enlarges the contact surface of particles, which largely increase the heat transfer rate and vaporization rate. According to the practical test, the unit vaporization capacity per hour of paddle rotary dryer is as much as 25-60kg/m2, which is 1-2 times of traditional rotary dryer. The output is raised by 50% and fuel consumption is reduced by 30%. At the same time, the footprint and drying efficiency is raised by 40%. It is applicable for the drying process of high-moisture materials with 50%-85% moisture, such as sludge, bean dregs, starch residue and sauce residue, spray corn bran, cassava dregs, brewer's grains, distiller's grains, straw, grass, organic fertilizer, chicken beef feces . We also help optimize the drying process according to the property of different biomass materials, production scale, application requirements, cost control, automation level and site condition.

working principle:


Material Flow: the crushed materials of which the moisture is about 50%-85% are sent into the roller by conveyor to realize downstream drying. Under the effect of inner shoveling plate, materials are took and scattered constantly, and move in spiral forward method. Through three layers (inner, middle and outer layer), heat exchange are realized between material and hot air medium. The materials that achieve drying effect move forward fast and are discharged out of the roller. Wet materials that still don’t achieve drying effect couldn’t move fast due to self-weight, and are dried completely during the controlling route, thus achieving drying effect. . After the whole drying process is completed, materials are discharged by screw conveyor. Inside the roller is installed with vibrating cleaning device, which prevents materials from bonding to the cylinder wall. Air Flow: through hot blast stove and air blower inflating, the air enters into the hot blast stove for combustion heating. Its temperature reaches up to 600-850℃, then it is inhaled by the dryer induced draft fan to dry material and evaporate water. When temperature decreases to 55-60℃, it is discharged out of the dryer. Wet air containing dust are discharged on standard through dust remover purifying.

mixing tyep machine.jpg




1.It can realize intelligent control, one-touch operation, automatic operating parameter control. The dryer stays at the best operating status all the time, thus guaranteeing that the dried material is of stable moisture and bright color.

2.The internal agitator can realize the process of mixing ,dispersing and crushing ,which ensure the full mass transfer and heat transfer between hot air and wet material.the unit capacity is raised to more than 50% and the energy consumption is reduced by more than 30%.

3. It adopts four-wheel driving which is more stable and reliable.

4. Saving 40% space and civil investment and 20%equipment investment compared to traditional dryers.

5. The inner structure of dryer uses multiple efficient lifting plates combined mode, thus controlling the drying process and heat distribution effectively. High heat use ratio, the discharged off-gas temperature is lower than 50℃.

6. It controls the material flow by frequency control. Users can adjust the required final moisture index easily based on requirement.

7. Modularized dust collecting-purifying heat recycle use allocation, safe and environmental.

8. It can be matched with a few new type hot blast stove. Efficient and energy-saving, controllable heat supply, simple operation. The energy consumption decline reaches up to 30 %, power consumption decreases by 20 %, the operating cost is lower.

Technical Parameters

model DLSG1408 DLSG1610 DSG2010/3 DLSG2210/3 DLSG2210/3 DLSG2510/3 DLSG2912/3
capacity(t/d) 31 45 87.5 104 122 150 181
evaporation capacity(t/h) 0.70 1.00 2.15 2.30 2.70 3.30 4.00
raw material moisture(%) 60±5%
drying materail moisture(%) 12-15%(can be adjusted)
drying temperature(℃) 350±50℃
motor power(ton) 40 55 95 100 125 145 165
weight(ton) 17 21.5 26.5 28.5 37 41 45.5
area(m2) 5×14m 6×16m 8×16m 8×16m 10×16m 10×18m 10×20m


Recommend Products

Solutions and Cases

Send Message

Thank you for your interest in dingli machine. Any of your comments or suggestions will be welcome to fill in the form of the following email via us.Please, or call + 86-371-67950999. Do not worry, we will not share your name, address or phone number with anyone. We love our company, and will do our best to help you. Thank you for taking the time to get in touch with us.

Name: *
Email: *
Tel: *


LWT type Screw dehydrator
LWT type Screw dehydrator

Kitchen waste dehydration; Fiber material enrichment and squeeze dehydration; Pulp, waste slag dewat...

Food residue crushing squeezed dehydrator
Food residue crushing squeezed dehydrator

Dingli brand LST series food residue crushing squeezed dehydrator is consisted of the hopper, the f...


No.12 Hongye Road HI-TECH Development Zone, Zhengzhou,China